The Particle Trap 3000 is a source capture tool that solves a major problem related to blowing off particles in the manufacturing and cleanroom environments. When trying to dislodge particles from various substrates, especially plastic parts and trays, the use of ionizing air guns, ionizing nozzles and airknives are commonly used devices. These devices not only aid in getting the contaminants off the product, but the fact that they control the static electricity means that the particles are not re-attracted to the newly cleaned materials. However, where do the particles go? The problem is that they either fall to the floor, onto a workstation or to personnel which means that they stay around and could eventually be the cause of rejects and poor yields. Using various blow-off devices in front of the Particle Trap 3000 solves the problem. The PT3000 utilizes a reverse fan that pulls ambient air into the cabinet that is supported by a pre-filter and hepa-filter system, so that the exit air is free of unwanted contaminants. The quick change pre-filter makes the Particle Trap 3000 the ideal system to enhance the process and increase yields, which translates into higher profits.
STATIC CLEAN INTERNATIONAL - PO Box 1063 - 15 Adams St. - Burlington, MA 01803 | Phone 877-STATIC3
In New England: Tele: (781) 229-7799 - Fax (781) 229-4555
You are at:>>Static Clean Ionizing Air Knives
PDF Specification: 