SB-30A Charging Power Supply

PDF Specification: sb30a.pdf

The SB-30A is a state-of-the-art 150W 30kV DC power supply designed to temporarily bond materials together using electrostatic charging applicators. The programmable output of the supply ranges from zero to greater than full-scale rating (30kV potential and 5.0mA current). The SB-30A local console provides a simple, reliable user interface for manual operation. A remote console is available for manual operation when the power supply is situated in an inconvenient or inaccessible location. The remote console, on/off footswitch and other accessories can be connected to the SB-30A Remote-Manual port. The SB-30A also features an electronic interface for fully automated operation with a PLC or similar equipment connected to the Remote-Auto port. Both ports can be wired using industry-standard DB-25 cables. The SB-30A output can be programmed for either constant-voltage (CV) or constant-current (CC) mode. Features • Reversible local-console orientation (factory option) for either table or wall mounting • Flat-panel console with membrane-switch commands, LED display and key-switch lockout • Two full-function I/O ports for manual and automated remote operation • Output protection for short-circuit, open-circuit and arc-over load conditions • Input protection for under-voltage and over-voltage line conditions • Thermal protection with over-temperature shutdown and fan-failure alert • Large, bright voltage/current-meter with signed 3-digit LED display • Self-mounting/stacking chassis provides top and bottom attachment without separate brackets • Four-port output compatible with most major-brand charging applicators • Stackable SB-30A combo available for applications requiring both positive and negative charging • Front-panel key-switch/indicator and rear-panel configuration switches for automated operating mode